81
General Help / Re: 116 chipset
« Last post by admin on January 12, 2016, 07:54:33 PM »I can't answer these. I have emailed the factory and will update when I get a reply.
Recent Posts
82
General Help / 116 chipset
« Last post by pierre@buckens.com on January 12, 2016, 11:55:26 AM »Hello,
Can you confirm that:
1 - it uses the Silan SC8113 (Philips SAA7113 compatible video decoder) + empia EM2861 video bridge; if not, what decoder chip is used?
2 - using the s-video input will bypass the chroma decoder in the SC8113.
Also do you what video decoder (besides a EM2861 bridge) is used in the Tevion DVD Maker (a.k.a. Kworld and Yakumo)
Can you confirm that:
1 - it uses the Silan SC8113 (Philips SAA7113 compatible video decoder) + empia EM2861 video bridge; if not, what decoder chip is used?
2 - using the s-video input will bypass the chroma decoder in the SC8113.
Also do you what video decoder (besides a EM2861 bridge) is used in the Tevion DVD Maker (a.k.a. Kworld and Yakumo)
83
EzCAP to other devices / Re: Help - Newbie Mac issues and basic understanding
« Last post by petalvengeance on January 09, 2016, 04:14:33 PM »Capture is very easy via an Xbox 360. There are several tutorials for set-up and capturing on the forum.
Once you have everything connected and set-up, here is a tutorial on how to record, edit and export for YouTube etc.
http://www.ezcap.tv/forum/index.php?topic=1241.0
-James
Once you have everything connected and set-up, here is a tutorial on how to record, edit and export for YouTube etc.
http://www.ezcap.tv/forum/index.php?topic=1241.0
-James
84
General Help / Re: Device Record Error
« Last post by Chris Adamsc on January 09, 2016, 01:21:17 PM »Thanks again for your help.
I will do as you say but can you please tell me why I am having the same trouble when trying to take it direct from the camcorder?
Chris
PS - Have just reinstalled Showbiz with the new licence code you sent me and I have now managed to capture the video from the camcorder to the laptop. I am still curious a to why it wouldn't work with the Debut software but very pleased that it is now working. Thank you for all your help which is much appreciated.
I will do as you say but can you please tell me why I am having the same trouble when trying to take it direct from the camcorder?
Chris
PS - Have just reinstalled Showbiz with the new licence code you sent me and I have now managed to capture the video from the camcorder to the laptop. I am still curious a to why it wouldn't work with the Debut software but very pleased that it is now working. Thank you for all your help which is much appreciated.
85
General Help / Re: Device Record Error
« Last post by admin on January 08, 2016, 10:47:38 PM »ah, ok. I have just read your original post.
I know what the problem is and I apologise for not spotting immediately.
You are using a tv/combi
No capture unit works with a tv/combi. I do not know why but I do know they just do not.
I'm very sorry.
If you source a stand alone vhs player and use a switchable scart to phono cable to connect the player to the unit, it will work.
I will pm you a valid serial for arcsoft.
I know what the problem is and I apologise for not spotting immediately.
You are using a tv/combi
No capture unit works with a tv/combi. I do not know why but I do know they just do not.
I'm very sorry.
If you source a stand alone vhs player and use a switchable scart to phono cable to connect the player to the unit, it will work.
I will pm you a valid serial for arcsoft.
86
General Help / Re: Device Record Error
« Last post by Chris Adamsc on January 08, 2016, 10:19:08 PM »I have received the unit thank you but am still getting the same message.
I finally got the movie from the camcorder to play in the software screen when I went to settings and then saved them. At the capture screen the movie was visibly running but I still get the same error message when I press capture.
I have tried this in the original software and also in the alternative but the same error occurs even when I can get the tape to play on the software screens.
I must be doing something wrong but have no idea what that is. The USB audio driver didn't install at the beginning when I loaded the software but I managed to solve that and it was after this that the movie played in the software but then stopped again. The audio driver is still showing as correctly installed at present
I can't try it in the Showbiz software because it won't accept my licence code. I have emailed Arcsoft about this but haven't yet had a reply. It probably wouldn't make any difference to the problem anyway.
Is there any further help or advice you could offer me please. As I am sure you will understand I am getting very frustrated.
Regards
Chris
I finally got the movie from the camcorder to play in the software screen when I went to settings and then saved them. At the capture screen the movie was visibly running but I still get the same error message when I press capture.
I have tried this in the original software and also in the alternative but the same error occurs even when I can get the tape to play on the software screens.
I must be doing something wrong but have no idea what that is. The USB audio driver didn't install at the beginning when I loaded the software but I managed to solve that and it was after this that the movie played in the software but then stopped again. The audio driver is still showing as correctly installed at present
I can't try it in the Showbiz software because it won't accept my licence code. I have emailed Arcsoft about this but haven't yet had a reply. It probably wouldn't make any difference to the problem anyway.
Is there any further help or advice you could offer me please. As I am sure you will understand I am getting very frustrated.
Regards
Chris
87
EzCAP to other devices / Re: Help - Newbie Mac issues and basic understanding
« Last post by johnj2000 on January 07, 2016, 06:47:40 PM »Hi James, thank you for the response. We have VideoGlide Capture which maybe the type of application you are referring to? And yes, you are correct he was playing on the iMac however he has now progressed onto a Xbox 360 so maybe the EzCap will come in useful?
88
General Help / Re: Device Record Error
« Last post by Chris Adamsc on January 06, 2016, 06:14:50 PM »Thank you very much indeed.
I look forward to receiving it.
Regards
Chris
I look forward to receiving it.
Regards
Chris
89
General Help / Re: Device Record Error
« Last post by admin on January 06, 2016, 05:41:51 PM »It sounds like the unit itself.
We will send you a new unit. We have your details.
We will send you a new unit. We have your details.
90
General Help / Re: Device Record Error
« Last post by Chris Adamsc on January 06, 2016, 01:43:39 PM »I downloaded and installed the software and it came up with the same message. After fiddling with the leads it suddenly connected but whilst recording it went back to screen. I think it may be a faulty excap.tv cable which is a shame because it hasn't had much use although I bought it in 2010.
Do you know anyway to test the cable?
I think it is unlikely to be the camcorder as it also can't find the device with the TV either.
Chris
Do you know anyway to test the cable?
I think it is unlikely to be the camcorder as it also can't find the device with the TV either.
Chris